Blablabla, bla bla enduro LT, blablabla mini DH, blablabla como nos gusta ponerle etiquetas a todo Por cierto ¿en serio se criticaba a la 601 por tener demasiado recorrido? ¿no es más fácil entrar en otro de los cientos de hilos de bicis que hay con menos recorrido para aportar algo positivo que entrar en uno específico para criticar que es mucho? **** humanidad.
Repito mis preguntas por si alguien las sabe contestar Por que en el cuadro del modelo Pro pone: "high Modular Carbon, V4L-Rear-End, X12 Thru-axle" , y en el cuadro de los modelos Comp pone: "High Modular Carbon, V4L-Rear end", ¿habrá alguna diferencia entre los cuadros? El basculante o por lo menos las bainas inferiores parecen aluminio Otra cosa, donde se ve la garantia que tienen?
No hay ninguna diferencia entre los cuadros, X12 Thru-Axle es el eje de 12, que lo llevan todas, lo que pasa es que en una lo ponen en la descripción y en las otras no. Y si las vainas inferiores son de aluminio.
eso es lo que ponde de las garantias GuaranteeBeginning with 2014, we grant you an additional warranty for 5 years. For bikes until modelyear 2013 in the category “Trail” we grant you an additional warranty of 4 years. This is without prejudice to your statutory rights and your contractually agreed guarantee claims. 1. Above and beyond our statutory duty to provide a warranty, we guarantee you that the frame of all bikes of the modelyear 2014 and later will remain free from material defects and defects in workmanship for a period of five years from delivery. Besides that, we will guarantee that the frame of bikes in the “Trail” category until modelyear 2013 will remain free from material defects and defects in workmanship for a period of four years from delivery. This guarantee does not extend to include parts subject to wear and tear or damage to paintwork/anodisation. Parts subject to wear and tear are bearing axes, roller bearings including their seals and lubricants (deep groove ball bearings/angular ball bearings/needle bearings etc.), sliding bearings, the guides and seals of suspension elements, drive components (chain/pinions/chain links/free-running hub) and brake pads. We will act at our own fair discretion and at our own expense in remedying any defects which occur via repair or via the supply of new or generally reconditioned parts. In the case of non-availability, we further reserve the right to provide replacements in a different colour/design or in the form of an equivalent model from a subsequent year. Other claims made on the basis of this guarantee shall be excluded, ii particular claims for compensation or for reimbursement of transport costs or costs of assembly. Notwithstanding this, the present guarantee shall be without prejudice to your contractual or statutory rights. The following additional conditions apply in respect of the guarantee without limitation to your statutory guarantee rights: The guarantee shall not apply in circumstances where the bicycle exhibits damage or appearances of wear and tear caused by use which is improper or inappropriate in accordance with the areas of deployment for the respective bicycle as presented on our website. The following measures in particular constitute improper use: Neglect of the product (insufficient care and maintenance) Alterations to the frame or fork (e.g. engravings or varnishing) Installation and conversions using additional components not expressly authorised by us or replacement of components installed by us when the bicycle was supplied with non-equivalent components Ongoing operation of a bicycle with wrongly adjusted, defective or worn out bearings or defective suspension elements Damage to the seat tube in the area where it meets the upper bar as a result of the saddle support being pulled too far out of the seat tube The guarantee shall further not apply in circumstances where the bicycle exhibits damage or appearances of wear and tear which are caused by excessive stresses of all kinds, in particular falls and jumps. Excessive stresses shall always be deemed to have taken place in the following cases: Deformation of the frame. This is the consequence of excessive stress and thus constitutes a sign of improper use. A bent or broken derailleur hanger (the part of the dropout to which the rear derailleur is attached). This is a result of overload or incorrect adjustment. This component is designed to break and prevents damage to the frame and derailleur caused by excessive stress. Our voluntary guarantee only applies to the initial purchaser of the product and requires a copy of the original sales voucher.
A mi la que me gustaba era la negra y gris, y ya sabes que las bicis se compran por el color y punto.
Venden un cuadro edición especial TLD muy molón, pero si no me dejas probar tu 29er ni las valoro, que no tengo ninguna referencia de ese tipo de ruedas.
Yo creo que las 2 tienen la vaina inferior de aluminio y la diferencia es que la pro lleva eje pasante de 12 y las comp el eje es de 10. Si te fijas en la foto de la web de YT el eje trasero es distinto. La verdad es que no entiendo pq no llevan todas el eje de 12.
