Cadenas Shimano use cuando tenía 9V y aceite no parecía . Al final pase a cera y a 10v y directamente pase de las cadenas Shimano y pase a las KMC que vienen directamente con cera squib lube . En mi caso no me es rentable comprar una cadena Shimano o similar si viene lubricada con aceite , por qué me toca tener que comprar keroseno para desengrasar y tener que buscar un sitio donde poderlo dejar con seguridad " el water " no es una opción . Saludos
claro, claro pero no aportáis informacion ni pruebas.............. el señor de la foto se llama Nick Murdick...trabaja o ha trabajado con Shimano ahora un extracto de una entrevista donde le preguntan por el tema........despues de leerla seguir con el bulo de la parafina.... BikeRumor: What is Shimano’s official stance on the chain lube that comes stock on a shimano chain? Is it actually a lube, or a grease? And is it best to leave it on until the chain gets noisy and relube, or strip it right away and relube before riding? Nick: So that brings us to lubrication. I mentioned that the chain wears because of friction as the chain moves to wrap around a gear. Well, that friction is reduced if there is lube on the chain. If there is dirt mixed in, the lube makes a bigger difference in reducing friction. If there is water mixed in, the lube helps displace the water. The grease that comes on a Shimano chain is applied at the factory to the individual pieces before the chain is assembled. The grease does a better job of reducing friction than aftermarket chain lubes and it lasts longer. The main reason we use liquid chain lube, whether it is one that stays liquid or a dry lube that has a solid lubricant in a liquid carrier (like a PTFE lube) is because we need to get the lube on a part that is not accessible without disassembling the chain. So the best thing to do when installing a new chain is to leave the factory grease on, not apply any other lube, ride until it wears out and then start applying liquid chain lube. In dusty conditions you can wipe off the outside of the new chain with a rag that is wet with a gentle degreaser to keep dirt from sticking to the grease. The factory grease also keeps the chain nice and quiet. After soaking a chain in degreaser and then lubing the chain with liquid lubricant the chain gets noticeably louder. Shimano does not have an official recommended chain lube. They all seem to work pretty good. Different people have different preferences and different conditions require different lubes. So there you have it. You absolutely should leave the original chain grease in place for best performance, and there are differences in construction that were necessary to make up for the narrower 10 speed chain. So far, those differences seem to be working as the 10 speed groups are still slightly better as far as wear, but it will be interesting to see how it plays out in the end!
